In power equipment manufacturing, overhead lifting equipment supports handling and assembling large transformer components. Different operations require suitable lifting capacity, speed control, and reliable equipment compatibility.

Yuantai Crane recently supplied four 10 ton MD dual speed wire rope hoists to a power industry manufacturer in Kenya. The hoists were configured for a 6.5-meter lifting height, 7/0.7 m/min lifting speed, and 20 m/min traveling speed. Each unit also features M4 duty classification, IP54 protection, 415V/50Hz/3-phase power supply, and both pendant and wireless remote controls.

10 ton double speed wire rope hoist for sale Kenya
10 ton double speed wire rope hoist for sale Kenya

A key requirement was to use the new double speed hoists with the customer’s existing LD single girder overhead cranes rather than replace the complete crane systems. Following delivery, Yuantai Crane’s engineers provided remote installation guidance. The customer successfully installed all four hoists, and the equipment is now in operation.

Project Specifications

The following table summarizes the main technical configuration supplied for this project.

ParameterSpecification
SupplierYuantai Crane
LocationKenya
IndustryPower Equipment Manufacturing
ApplicationLarge Power Transformer Assembly
Hoist TypeMD Dual Speed Wire Rope Hoist
Quantity4 Sets
Rated Capacity10 Tons Each
Lifting Height6.5 m
Lifting Speed7/0.7 m/min
Traveling Speed20 m/min
Duty ClassM4
Power Supply415V/50Hz/3-phase
Protection GradeIP54
Control MethodPendant + Wireless Remote Control
InstallationExisting LD Single Girder Overhead Cranes

Lifting Requirements for Transformer Assembly

Large transformer manufacturing involves handling heavy components and assemblies throughout the production process. For this type of workshop, the hoist needs to provide sufficient lifting capacity, suitable speed control, and compatibility with the existing crane system.

The Kenyan customer’s requirements centered on three main points:

Controlled lifting: Two lifting speeds to accommodate general lifting and slower positioning operations.

Existing crane compatibility: Four new hoists to work with the existing LD single girder overhead cranes, avoiding the need to replace the complete crane systems.

Electrical and operating requirements: A 415V/50Hz/3-phase configuration, IP54 protection, and flexible controls.

Based on these requirements, Yuantai Crane supplied four 10 ton MD hoists with configurations suited to the customer’s existing equipment and workshop conditions.

MD Dual-Speed Wire Rope Hoists: Key Configurations and Benefits

The selected 10 ton wire rope hoists combine two lifting speeds and a traveling speed of 20 m/min. The following features address the main requirements of the project.

10 ton dual speed wire rope hoist design drawing
10 ton dual speed wire rope hoist design drawing

7/0.7 m/min Dual-Speed Lifting

Each hoist provides two lifting speeds:

  • 7 m/min: For general lifting operations and moving loads through the required vertical travel.
  • 0.7 m/min: For slower lifting and more controlled positioning when handling components during assembly.

The two-speed arrangement gives operators greater flexibility when different lifting stages require different movement speeds. Instead of relying on one fixed lifting speed, operators can select the appropriate speed for the task.

For transformer assembly workshops, this provides a practical combination of lifting efficiency and controlled load positioning.

Compatibility with Existing LD Single Girder Overhead Cranes

Another important feature of this project is the compatibility between the new MD hoists and the customer’s existing LD single girder overhead cranes.

Installation of 10 ton wire rope hoists on existing overhead cranes in Kenya
Installation of 10 ton wire rope hoists on existing overhead cranes in Kenya

By retaining the existing crane systems and installing compatible replacement hoists, the customer could upgrade the lifting equipment without investing in entirely new overhead cranes. This helps make better use of the existing workshop infrastructure and reduces the scope of equipment replacement.

For similar retrofit projects, Yuantai Crane reviews the existing crane arrangement, trolley dimensions, mounting conditions, available headroom, and electrical connections before confirming the hoist configuration.

Electrical Configuration and Operating Controls

In addition to the lifting performance, the four hoists were configured with M4 duty classification, 415V/50Hz/3-phase power supply, and IP54 protection to meet the customer’s specified requirements.

Pendant control and remote control for MD wire rope hoist
Pendant control and remote control for MD wire rope hoist

Each hoist also comes with pendant and wireless remote controls. This provides two operating options, allowing the customer to select a suitable control method according to the working position and site operating procedures.

MD Dual-Speed vs. European-Style Wire Rope Hoists

The Kenyan project demonstrates the application of MD dual-speed wire rope hoists. However, industrial customers in Kenya and other East African markets may have different requirements regarding lifting precision, available headroom, working frequency, and equipment investment.

In addition to MD hoists, Yuantai Crane supplies European-style electric wire rope hoists with dual-speed or variable frequency drive (VFD) control options.

MD Type Dual-Speed Wire Rope Hoist

MD hoists are suitable for conventional industrial lifting applications where customers need two selectable lifting speeds and a practical equipment configuration.

Typical applications include:

  • Transformer and electrical equipment manufacturing
  • Steel fabrication and machinery workshops
  • General industrial material handling
  • Existing single girder overhead crane upgrades

Their main advantages include straightforward two-speed operation, practical installation options, and suitability for a range of conventional overhead crane applications.

European-Style Electric Wire Rope Hoist

European-style hoists offer compact structural designs, including low-headroom configurations. Depending on the project requirements, customers can choose dual-speed or VFD-controlled lifting.

Typical applications include:

  • Modern manufacturing facilities
  • Precision equipment assembly
  • Production lines with limited installation space
  • Workshops requiring adjustable lifting speeds

With suitable VFD configurations, operators can adjust lifting speed and acceleration or deceleration according to the application. Different duty classes and structural configurations are also available based on the required working conditions.

When selecting an electric wire rope hoist, buyers should consider several factors together:

  1. Rated capacity and lifting height: Confirm the maximum load and the required vertical lifting distance.
  2. Lifting and traveling speeds: Select speeds according to the lifting process and positioning requirements.
  3. Duty classification: Match the hoist’s duty class to the expected operating frequency and workload.
  4. Power supply and protection: Confirm voltage, frequency, phase, and the required protection grade.
  5. Crane compatibility: For replacement or upgrade projects, provide the existing crane type, installation dimensions, and relevant drawings.

Successful Installation with Remote Guidance from Yuantai Crane

For overseas lifting equipment projects, installation support is an important part of the delivery process.

After the four MD dual-speed wire rope hoists arrived in Kenya, Yuantai Crane’s engineers provided remote technical guidance to the customer’s installation team. All four 10 ton hoists have now been installed and put into operation.

10 ton dual speed wire rope hoist for transformer assembly in Kenya
10 ton dual speed wire rope hoist for transformer assembly in Kenya

Yuantai Crane supports overseas customers with equipment drawings, technical documentation, installation guidance, and after-sales assistance according to project requirements. Remote support helps customers coordinate installation with their local teams, while on-site technical services can be discussed when required.

Yuantai Crane: Wire Rope Hoist Manufacturer for Kenya and East Africa

With more than 25 years of manufacturing experience, Henan Yuantai Crane Machinery Co., Ltd. supplies wire rope hoists, electric chain hoists, overhead cranes, gantry cranes, jib cranes, and customized lifting equipment for industrial applications.

Our services cover equipment selection, technical drawings, manufacturing, factory testing, documentation, and installation support. We have supplied lifting equipment to customers in more than 100 countries and regions.

For customers in Kenya and other East African markets, we can evaluate project requirements and recommend suitable hoist configurations for new crane systems or compatible existing cranes.

Contact Yuantai Crane for Your Wire Rope Hoist Requirements

Whether you need a replacement hoist for an existing overhead crane or a complete lifting solution for a new production line, Yuantai Crane can help evaluate your requirements and provide a suitable configuration.

Send us your required lifting capacity, lifting height, crane drawings, and working conditions to get a tailored wire rope hoist proposal for your project.

Similar Posts